Login | Register
My pages Projects Community openCollabNet

Discussions > users > Re: [ANNOUNCE] FSVS 1.1.16 released, and [Alert]

fsvs
Discussion topic

2020-03-13: This site is going to be decommissioned and shut down very soon. Please copy and archive any data you wish to keep ASAP

Hide all messages in topic

All messages in topic

Re: [ANNOUNCE] FSVS 1.1.16 released, and [Alert]

Author pmarek
Full name P.Marek
Date 2008-06-19 05:43:27 PDT
Message Hello Gunnar!

> It's nice to see the last features "stop_auto" and "author" introduced
> with this release.
You're welcome!

> The author option with $SUDO_USER works like promised :-) . Where is the
> challenge with using author and svn+ssh:// access?
Independent on the protocol used I give the author to svn_cmdline_setup_auth_baton();
but (I think because svn+ssh makes a new process (svnserve below sshd)) that this
doesn't get taken, but the ssh user.

If you know any workaround I'd be happy to hear it.

BTW I don't know (because I can't test) whether that works for http:// or https://.



Regards,

Phil


--
Versioning your /etc, /home or even your whole installation?
             Try fsvs (fsvs.tigris.org)!

Re: [ANNOUNCE] FSVS 1.1.16 released, and [Alert]

Author tekknokrat
Full name Gunnar Thielebein
Date 2008-06-19 05:29:34 PDT
Message Hi Phil,

It's nice to see the last features "stop_auto" and "author" introduced
with this release.
The author option with $SUDO_USER works like promised :-) . Where is the
challenge with using author and svn+ssh:// access?

Best Regards, Gunnar

-------- Original-Nachricht --------
 > Datum: Wed, 18 Jun 2008 17:22:08 +0200 (CEST)
 > Von: "Philipp Marek" <philipp at marek dot priv dot at>
 > An: announce at fsvs dot tigris dot org
 > CC: users at fsvs dot tigris dot org, dev at fsvs dot tigris dot org
 > Betreff: [ANNOUNCE] FSVS 1.1.16 released, and [Alert]

 > Hello everybody,
 >
 > here's a fresh release.
 >
 >
 > Important: if you're versioning your /etc/ *and* you're using the DynDNS
 > registration client, please change your password; the filtering script
 > used
 > for ddclient.conf was wrong, and so your password might be stored in your
 > repository.
 >
 >
 > It's been about 3 months since the last feature release; it took a bit
 > longer because I changed some internal conventions and shoved code
around.
 >
 >
 > The major changes since 1.1.15 are:
 > - FSVS_WARNINGS removed. Use FSVS_WARNING.
 > - Handling of FSVS_WAA and FSVS_CONF now via the normal option handling,
 > to
 > reduce code size. Now it's possible to use "-oconf=..." on the command
 > line, too.
 > (But it's not possible to override the paths from the config file.)
 > - Bugfix for error after commit, when $EDITOR returned an 0 byte file as
 > commit message.
 > - "fsvs diff" changed to recursive behavior, as "svn" does.
 > - Fixed "fsvs diff -rX" to print only changed entries, not the whole
list.
 > - "fsvs diff -rX:Y" reimplemented, too; performance could get
optimized.
 > - Rewrote entry fetching from the repository. Previously a file with bad
 > mode (like 0111) couldn't get diffed.
 > - "update -rX" and "diff -rX" (but not "diff -rX:Y") now use the per-url
 > override syntax (see "-u").
 > - New option to set maximum number of revisions on "fsvs log".
 > - Fixed diff for symlinks and devices.
 > - New option "stop_change" for use in scripts.
 > - New option "author" for commit (but that doesn't work for svn+ssh://)
 > - Changed from "merge" to "diff3" as merge program; seems to be more
 > common.
 > - Committed the distclean patch from Sheldon Hearn.
 > - "make install" implemented.
 > For the full list please see
 >
http://fsvs.tigris.o​rg/source/browse/fsv​s/tags/fsvs-1.1.16/f​svs/CHANGES?rev=1774​&view=markup
 >
 > There are some known issues, too:
 > - Multi-URL code has been found to be not perfect - removing a (common)
 > directory removes files from all URLs.
 > - "fsvs sync" now tries to fetch all file sizes and entry types from the
 > repository, too. For that we have to do a recursive listing, and fetch
 > special
 > entries; encoded files with only a few kB are looked at, too. Needs
more
 > time
 > and bandwidth.
 > - "fsvs revert -rX" still doesn't work if types of entries would get
 > changed (dir -> file, symlink -> device, etc.) - that's next on the
 > list. For
 > this release "diff" was done, and I hope it works better.
 >
 > So there's still some work left; stay tuned :-)
 >
 >
 > Please fetch the sources from http://freshmeat.net​/projects/fsvs/, or ask
 > your
 > distributions for packages - at least for debian and fedora you should be
 > fine.
 >
 > If there are any questions, problems or suchlike, don't hesitate to
ask on
 > the mailing
 > lists.
 >
 >
 > Regards,
 >
 > Phil
 >
 >
 > --
 > Versioning your /etc, /home or even your whole installation?
 > Try fsvs (fsvs.tigris.org)!
 >
 >
 >
 >
 > --------------------​--------------------​--------------------​---------
 > To unsubscribe, e-mail: users-unsubscribe@fs​vs.tigris.org
 > For additional commands, e-mail: users-help at fsvs dot tigris dot org

[ANNOUNCE] FSVS 1.1.16 released, and [Alert]

Author pmarek
Full name P.Marek
Date 2008-06-18 08:22:08 PDT
Message Hello everybody,

here's a fresh release.


Important: if you're versioning your /etc/ *and* you're using the DynDNS
registration client, please change your password; the filtering script used
for ddclient.conf was wrong, and so your password might be stored in your
repository.


It's been about 3 months since the last feature release; it took a bit
longer because I changed some internal conventions and shoved code around.


The major changes since 1.1.15 are:
- FSVS_WARNINGS removed. Use FSVS_WARNING.
- Handling of FSVS_WAA and FSVS_CONF now via the normal option handling, to
  reduce code size. Now it's possible to use "-oconf=..." on the command line, too.
  (But it's not possible to override the paths from the config file.)
- Bugfix for error after commit, when $EDITOR returned an 0 byte file as
  commit message.
- "fsvs diff" changed to recursive behavior, as "svn" does.
- Fixed "fsvs diff -rX" to print only changed entries, not the whole list.
- "fsvs diff -rX:Y" reimplemented, too; performance could get optimized.
- Rewrote entry fetching from the repository. Previously a file with bad
  mode (like 0111) couldn't get diffed.
- "update -rX" and "diff -rX" (but not "diff -rX:Y") now use the per-url
  override syntax (see "-u").
- New option to set maximum number of revisions on "fsvs log".
- Fixed diff for symlinks and devices.
- New option "stop_change" for use in scripts.
- New option "author" for commit (but that doesn't work for svn+ssh://)
- Changed from "merge" to "diff3" as merge program; seems to be more common.
- Committed the distclean patch from Sheldon Hearn.
- "make install" implemented.
For the full list please see
http://fsvs.tigris.o​rg/source/browse/fsv​s/tags/fsvs-1.1.16/f​svs/CHANGES?rev=1774​&view=markup

There are some known issues, too:
- Multi-URL code has been found to be not perfect - removing a (common)
  directory removes files from all URLs.
- "fsvs sync" now tries to fetch all file sizes and entry types from the
  repository, too. For that we have to do a recursive listing, and fetch special
  entries; encoded files with only a few kB are looked at, too. Needs more time
  and bandwidth.
- "fsvs revert -rX" still doesn't work if types of entries would get
  changed (dir -> file, symlink -> device, etc.) - that's next on the list. For
  this release "diff" was done, and I hope it works better.

So there's still some work left; stay tuned :-)


Please fetch the sources from http://freshmeat.net​/projects/fsvs/, or ask your
distributions for packages - at least for debian and fedora you should be fine.

If there are any questions, problems or suchlike, don't hesitate to ask on the mailing
lists.


Regards,

Phil


--
Versioning your /etc, /home or even your whole installation?
             Try fsvs (fsvs.tigris.org)!
Messages per page: