Login | Register
My pages Projects Community openCollabNet

Discussions > users > Re: [ANNOUNCE] FSVS 1.1.5 released

fsvs
Discussion topic

Hide all messages in topic

All messages in topic

Re: [ANNOUNCE] FSVS 1.1.5 released

Author Gunter Ohrner <G dot Ohrner at post dot rwth-aachen dot de>
Full name Gunter Ohrner <G dot Ohrner at post dot rwth-aachen dot de>
Date 2007-06-22 01:39:20 PDT
Message Am Donnerstag, 21. Juni 2007 schrieb Gunter Ohrner:
> I've not yet managed to run sync-repos completely so far. This process

Ok, the sync-repos completed during the night and fsvs seems to work fine.

I hope the Subversion developers optimize their handling of directories
with lots of files, currently all operations involving these dirs slow my
server down to a crawl...

Greetings,

  Gunter

--
*** Powered by AudioScrobbler --> http://www.last.fm/u​ser/Interneci/ ***
03:05 | Tristania - World of Glass
02:58 | Tristania - Equilibrium
02:47 | Epica - Consign to Oblivion ("A New Age Dawns" - 3)
02:31 | Epica - Trois Vierges
*** PGP-Verschlüsselung bei eMails erwünscht :-) *** PGP: 0x1128F25F ***
Attachments

Re: [ANNOUNCE] FSVS 1.1.5 released

Author Gunter Ohrner <G dot Ohrner at post dot rwth-aachen dot de>
Full name Gunter Ohrner <G dot Ohrner at post dot rwth-aachen dot de>
Date 2007-06-21 09:48:52 PDT
Message Am Donnerstag, 21. Juni 2007 schrieb Ph. Marek:
> > all files show up as "N..." if I do "fsvs st", is this to be expected?
> No, it isn't. There seems to be something broken.

Ok, I just re-tried with a fresh copy of my 1.1.4 WAA and just applied the
migration script, without reloading anything. However, fsvs still
displays all files as being new.

I've not yet managed to run sync-repos completely so far. This process
takes ages - not fsvs' but svn's fault - and I always had to reboot or
siwtch off the laptop before it completed. I'll try it this night, but
I'll have to transport my laptop to a different location tomorrow
morning, so most likely I will have to interrupt it again if it didn't
complete until then...

Greetings,

  Gunter

--
+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+
Nevertheless Christoph has a point even if its hidden behind a George
Bush approach to diplomacy. -- Alax Cox versucht einen
aufkeimenden Flamewar zu löschen ;)
+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+
+ PGP-verschlüsselte Mails bevorzugt! +
+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+
Attachments

Re: [ANNOUNCE] FSVS 1.1.5 released

Author Gunter Ohrner <G dot Ohrner at post dot rwth-aachen dot de>
Full name Gunter Ohrner <G dot Ohrner at post dot rwth-aachen dot de>
Date 2007-06-21 07:28:15 PDT
Message Am Donnerstag, 21. Juni 2007 schrieb Ph. Marek:
> > Second, after running the generated upgrade lines, deleting my waa
> > and reloading the url and ignore pattern lists,
> The lines should practically *do* the reload of URLs and ignore
> patterns ...

Whoops... In fact it says "do ONE OF the following"...
As the saying goes, "Wer lesen kann ist klar im Vorteil"...

Ok, my fault, but maybe this could be stressed a bit more in the
instructions. There'll probably be a few more people which are at least
as stupid as me when it comes to grokking update instructions... ;) (Or
at least I hope there are... ;)

Greetings,

  Gunter

--
+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+
In what other country of the world, for example, is it necessary to have
a warning printed on chainsaws that says: "WARNING: Do not try to stop
blade with hands"? -- Life in the USA
(http://science.slash​dot.org/comments.pl?​sid=175544&cid=1​4594663)
+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+
+ PGP-verschlüsselte Mails bevorzugt! +
+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+-+-+-+-​+-+-+-+-+-+-+
Attachments

Re: [ANNOUNCE] FSVS 1.1.5 released

Author pmarek
Full name P.Marek
Date 2007-06-20 21:48:11 PDT
Message Hello Gunter,

> Am Mittwoch, 20. Juni 2007 schrieb Ph. Marek:
>> **** PLEASE READ "UPGRADE-FROM-1.1.4.txt" (INCLUDED IN THE TARBALL)
> Ok, I did - is it correct that I'm supposed to do a sync-repos after the
> update procedure?


> First of all, the lines generated by the update script do not work as-is,
> as they do not generate an mkdir command to create the target config
> directory. No big deal, but it's not mentioned at all in the update
> document.
Uh, yes, sorry ... there's something missing, you're right.

> Second, after running the generated upgrade lines, deleting my waa and
> reloading the url and ignore pattern lists,
The lines should practically *do* the reload of URLs and ignore patterns ...

> all files show up as "N..."
> if I do "fsvs st", is this to be expected?
No, it isn't. There seems to be something broken.

> I'm currently running a sync-repos to heck if this helps. And yes, I did
> backup my previous 1.1.4 WAA... ;)
Well, after a sync-repos it should work as expected.

Sorry for the inconvenience.


Regards,

Phil



--
Versioning your /etc, /home or even your whole installation?
             Try fsvs (fsvs.tigris.org)!

Re: [ANNOUNCE] FSVS 1.1.5 released

Author Gunter Ohrner <G dot Ohrner at post dot rwth-aachen dot de>
Full name Gunter Ohrner <G dot Ohrner at post dot rwth-aachen dot de>
Date 2007-06-20 13:08:59 PDT
Message Am Mittwoch, 20. Juni 2007 schrieb Ph. Marek:
> **** PLEASE READ "UPGRADE-FROM-1.1.4.txt" (INCLUDED IN THE TARBALL)

Ok, I did - is it correct that I'm supposed to do a sync-repos after the
update procedure?

First of all, the lines generated by the update script do not work as-is,
as they do not generate an mkdir command to create the target config
directory. No big deal, but it's not mentioned at all in the update
document.

Second, after running the generated upgrade lines, deleting my waa and
reloading the url and ignore pattern lists, all files show up as "N..."
if I do "fsvs st", is this to be expected?

I'm currently running a sync-repos to heck if this helps. And yes, I did
backup my previous 1.1.4 WAA... ;)

Greetings,

  Gunter

--
*** Powered by AudioScrobbler --> http://www.last.fm/u​ser/Interneci/ ***
21:42 | Kamelot - The Pendulous Fall (Bonus Track)
21:38 | Kamelot - Eden Echo
21:34 | Kamelot - Anthem
21:30 | Kamelot - Silence of the Darkness
*** PGP-Verschlüsselung bei eMails erwünscht :-) *** PGP: 0x1128F25F ***
Attachments

[ANNOUNCE] FSVS 1.1.5 released

Author pmarek
Full name P.Marek
Date 2007-06-20 00:35:45 PDT
Message Hello everybody,


FSVS 1.1.5 is released.


**** PLEASE READ "UPGRADE-FROM-1.1.4.txt" (INCLUDED IN THE TARBALL) ****


Sorry for yelling, but I think that's important:
*** The WAA format has changed a bit. ***

- You can now safely remove your FSVS spool directory ($FSVS_WAA,
  "/var/spool/fsvs") to free a bit of space if needed.
- The important settings, like URLs and ignore patterns, can now be
  versioned like any other file too.

The second point is the most important here.
(Once upon a time I had planned to fold the ignore patterns into
"svn:ignore" properties - but they just don't match the syntax.
So I took that simpler way.

(Note: you can still override both defaults, using the environment
variables $FSVS_WAA and $FSVS_CONF.)


What other changes have been done since 1.1.4?
- Diff now knows "-v" for additional meta-data diff.
- Some cleanups and small bugfixes.
- A changed ctime is no longer seen as meta-data change - it's only an
  indicator for *possible* changes.
- For new, added and unversioned entries no other flags than those are
  printed on "fsvs status" - they're kind of irrelevant, as they're
  implied. (So you won't see "mtime changed" on a new entry).
- New parameter -f for filtering entries.
  See
http://fsvs.tigris.o​rg/source/browse/*ch​eckout*/fsvs/tags/fs​vs-1.1.5/www/doxygen​/html/group__cmds.ht​ml#glob_opt_filter
- If no path arguments are given, the current directory is taken as the
  implicit parameter.


And a more important change:
- Option for path display settings.
  You can now choose how you want the paths printed; see
http://fsvs.tigris.o​rg/source/browse/*ch​eckout*/fsvs/tags/fs​vs-1.1.5/www/doxygen​/html/group__options​.html#o_opt_path
  for details.


Downloads are available from http://freshmeat.net​/projects/fsvs;
support on users@ (or, for code-internal things, dev@) fsvs.tigris.org.
(If freshmeat is *still* not up-to-date when you read this, there's
http://fsvs.tigris.o​rg/servlets/ProjectD​ocumentList?folderID​=8182, too -
although I prefer to see the number of downloads on freshmeat :-)


For the next version I plan to do some kind of configuration file support
- so that settings like for path display can be set persistent.


Feedback is appreciated.


Regards,

Phil


--
Versioning your /etc, /home or even your whole installation?
             Try fsvs (fsvs.tigris.org)!
Messages per page: